Print Page   |   Contact Us   |   Sign In   |   Register
03/29/17 Vertical Turbine Sump Design WEBINAR IEPA#11156
Register View Registrations Tell a Friend About This EventTell a Friend
 

This webinar will not be archived and available for viewing live only.

 Export to Your Calendar 3/29/2017
When: Wednesday, March 29, 2017
12:00 pm
Where: Your home or office computer
United States
Presenter: Jim Swetye, Senior Technical Trainer
Contact: Marianne Perino
866-521-3595 ext6


Online registration is available until: 3/29/2017
« Go to Upcoming Event List  

 

Vertical Turbine Sump Design Webinar

 

CEU TYPE: Technical
WEBINAR TYPE: Technical
IEPA#: 11156
IDEM#Applied for

 

This webinar will not be archived and  is available for viewing live only.   

Summary: Pump inlet conditions are simultaneously one of the most underrated aspects of pumping station design and probably the greatest reason for pumping station success or failure. A pump's performance depends greatly on the quality of the pump intake. Recommendations in this presentation follow guidelines set forth by the Hydraulic Institute Standard 9.8 on Pump Intake Design. Many vertical turbine sump installations require a multiple-pump intake structure. This is quite common for cooling tower applications. The pump intake design must provide reasonable velocity distribution at the pump inlet, reduce swirling, severely limit air entrainment, satisfy NPSH conditions, and afford enough submergence to avoid vortices. Having adequate pump inlet conditions will greatly reduce vibration and cavitation, pump system maintenance, and the loss of pump performance.


Presenters: Jim Swetye Senior Technical Trainer
Location: Grundfos, Ohio
Education: Bachelor of Arts from Hiram College, Ohio; Master of Science in Education/Curriculum Leadership from Emporia State University, Kansas
Years in pump industry: 38
Specialties: Pumping systems for commercial HVAC, residential hydronics, industrial, and municipal market segments;
Former Vice President of Knowledge and Education at the Hydraulic Institute and current member of the Education Marketing Executive Committee of Pump Systems Matter


 

REGISTRATION & HOURS: This webinar will begin at 12:00pm and conclude by 1:00pm CDT. Earn up to 1 PDH or RTC hour. After registering with Illinois Section AWWA, attendees will be furnished via email with all materials and links needed to participate in the webinar. Questions? Call 866-521-3595 Ext. 3

COST:

Registration Type

ISAWWA Member Rate
Non ISAWWA Member Rate IND Rate
Regular (ends 03/29/17)
$0.00
$30 $25

 





Membership Software Powered by YourMembership  ::  Legal